1. Single Frequency Repeater Mode
allows your device to be used, alternatively, as a
repeater, enabling your
communications to go further.
Based on interference cancellation techniques, the
PD985 uses one slot to receive a signal, and another to
transmit it in the same frequency,
while using DMO
mode to extend the communication distance.
2. Longer Battery Life
The all new Smart Battery
of the PD985 mean that this two-way radio device can be
used even on long shifts, and the user is able to
monitor the battery status.
Consequently, the PD985
charging time is dramatically decreased.
3. Advanced Noise Cancellation Technology
Offering an exceptional audio experience, the PD985
boasts new noise cancellation
users to hear, and speak, clearly, even in loud
Advanced Features Explained:
Full Duplex: PD985
enables frontline personnel to make full duplex calls
between other PD985 radios, PABX, PSTN and mobile phones
Single Frequency Repeater Mode: The PD985 is able to use
one slot to receive a signal and another slot to
transmit it on the same frequency using DMO mode to
extend radio coverage.
Built-in Bluetooth 4.0: With
integrated Bluetooth 4.0, the PD985 not only supports
audio transmit, but it will also allow programming via
Noise Cancellation and 2.5W Audio Output:
Maximum 2.5W output speaker and new noise cancelling
technology ensures clear and loud voice communication.
IP68 Protection: Complies with the highest dust and
waterproo ng standard to confront the harshest
environments The radio continues to function after
submersion in fresh water down to 2 meters for up to 4
Smart Battery: This feature makes it easier to
monitor the battery status, such as battery life time
and charging time, and will reduce the charging time.
Audio Recording via Micro SD card: The PD985 supports up
to a 32GB Micro SD card, to record up to 576 hours of
digital / analogue audio.
Safety features: Man down,
lone worker and emergency mode are included as standard
to protect user wellbeing.
Full suite of DMR
Services: including remote monitor, remote
enable/disable and call alert
* 500mW RF power output *See PDF download for